|
|
Your Free IP PBX |
|
|
|||||||||||
|
|
Documentation
Documentation.HowToBuildAFreeSentralNetwork HistoryHide minor edits - Show changes to output July 27, 2010, at 03:35 PM
by -
Changed lines 40-42 from:
An important role, for my network phones, is played by the prefix. In this case the prefix is considered a digit that identifies a branch(the first digit is the prefix: 7 for branch1 and 8 for branch2). The caller will dial the prefix and an [[Extensions#general|extensions]], when calling to a phone that belongs to another branch. The call will be received at headquarters where the prefix will be cut and the call forwarded to that specific branch. I avoided confusion by choosing 7 and 8 for prefixes. An unwanted match will occur if one of the branches has the [[Outbound#system_callerid|System prefix]] 2 and a group that has the extension 20. You will call to 220 wanting to call the group 20 but your call will be forwarded to the [[Extensions#general|extensions]] 220 within that branch. to:
An important role, for my network phones, is played by the prefix. In this case the prefix is considered a digit that identifies a branch(the first digit is the prefix: 7 for branch1 and 8 for branch2). The caller will dial the prefix and an [[Extensions#general|extension]], when calling to a phone that belongs to another branch. The call will be received at headquarters where the prefix will be cut and the call forwarded to that specific branch. I avoided confusion by choosing 7 and 8 for prefixes. An unwanted match will occur if one of the branches has the [[Outbound#system_callerid|System prefix]] 2 and a group that has the extension 20. You will call to 220 wanting to call the group 20 but your call will be forwarded to the [[Extensions#general|extension]] 220 within that branch. April 05, 2010, at 02:05 PM
by -
Changed line 6 from:
(:tocportion TableOfContents:) to:
(:toc:) March 18, 2010, at 05:24 PM
by -
Changed lines 3-5 from:
%justify% This tutorial will try to guide you through the process of comprehending, planning and building a FreeSentral network. to:
%justify%This tutorial will try to guide you through the process of comprehending, planning and building a FreeSentral network. Changed lines 59-60 from:
You would probably want to read [[HowToSetUpBranchesInHeadquarter|How to set up office branches in headquarters]] if you want your network to work. %justify% to:
You would probably want to read [[HowToSetUpBranchesInHeadquarter|How to set up office branches in headquarters]] if you want your network to work.%justify% March 18, 2010, at 05:22 PM
by -
Changed line 3 from:
to:
%justify% Changed lines 16-17 from:
%justify%FreeSentral can be configured to connect headquarters to office branches. to:
FreeSentral can be configured to connect headquarters to office branches. Added line 60:
%justify% March 18, 2010, at 05:12 PM
by -
Changed line 16 from:
FreeSentral can be configured to connect headquarters to office branches. to:
%justify%FreeSentral can be configured to connect headquarters to office branches. March 18, 2010, at 05:10 PM
by -
Changed line 15 from:
%p text-align=justify% to:
Changed lines 25-26 from:
VoIP phones allow telephone calls to be made over an IP network such as the Internet instead of an ordinary PSTN system.%p% to:
VoIP phones allow telephone calls to be made over an IP network such as the Internet instead of an ordinary PSTN system. Changed lines 38-39 from:
For a branch to be in working status, it must have the phones connected to it.The VoIP phones must be recognized by the application, so it is necessary to think on how many [[Extensions#general|extensions]] to add for every branch(you can see the [[Extensions#general|extensions]] I choose for branches: 200-299). You may want to avoid [[Extensions#general|extensions]] starting with 0, 1 or 9 because they might match short or emergency numbers. to:
For a branch to be in working status, it must have the phones connected to it.The VoIP phones must be recognized by the application, so it is necessary to think on how many [[Extensions#general|extensions]] to add for every branch(you can see the extensions I choose for branches: 200-299). You may want to avoid extensions starting with 0, 1 or 9 because they might match short or emergency numbers. Changed lines 42-44 from:
I avoided confusion by choosing 7 and 8 for prefixes. An unwanted match will occur if one of the branches has the [[Outbound#system_callerid|System prefix]] 2 and a group that has the [[Extensions#general|extensions]] 20. You will call to 220 wanting to call the group 20 but your call will be forwarded to the [[Extensions#general|extensions]] 220 within that branch. to:
I avoided confusion by choosing 7 and 8 for prefixes. An unwanted match will occur if one of the branches has the [[Outbound#system_callerid|System prefix]] 2 and a group that has the extension 20. You will call to 220 wanting to call the group 20 but your call will be forwarded to the [[Extensions#general|extensions]] 220 within that branch. Changed line 50 from:
Think on how to route calls. Routing calls is only possible if you set prefixes in headquarters for every branch. You may wonder why this setting is so important. Well, the prefix consists of a number of digits that uniquely associates that call to a branch. A call from a branch to a branch is sent to headquarters. The headquarter forwards the call according to the prefix set for that branch. Before forwarding the call, the headquarters will cut that prefix according to the digits set to be cut for that [[Outbound#dial_plan|branch's dial plan]]. to:
Think on how to route calls. Routing calls is only possible if you set prefixes in headquarters for every branch. You may wonder why this setting is so important. Well, the prefix consists of a number of digits that uniquely associates that call to a branch. A call from a branch to a branch is sent to headquarters. The headquarter forwards the call according to the prefix set for that branch. Before forwarding the call, the headquarters will cut that prefix according to the digits set to be cut for that branch's [[Outbound#dial_plan|dial plan]]. March 18, 2010, at 05:08 PM
by -
Changed lines 4-5 from:
%p text-align=justify%This tutorial will try to guide you through the process of comprehending, planning and building a FreeSentral network.%p% to:
This tutorial will try to guide you through the process of comprehending, planning and building a FreeSentral network. Added lines 13-14:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/headquarter_branches_small.jpg Deleted lines 15-16:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/headquarter_branches_small.jpg March 18, 2010, at 05:04 PM
by -
Added line 13:
%p text-align=justify% Changed line 25 from:
VoIP phones allow telephone calls to be made over an IP network such as the Internet instead of an ordinary PSTN system. to:
VoIP phones allow telephone calls to be made over an IP network such as the Internet instead of an ordinary PSTN system.%p% March 18, 2010, at 05:04 PM
by -
Changed lines 4-5 from:
This tutorial will try to guide you through the process of comprehending, planning and building a FreeSentral network. to:
%p text-align=justify%This tutorial will try to guide you through the process of comprehending, planning and building a FreeSentral network.%p% Changed lines 8-9 from:
%center%Designing the network is the first important step to a functional FreeSentral network. To understand this step, you must know the concepts used in the network.%center% to:
Designing the network is the first important step to a functional FreeSentral network. To understand this step, you must know the concepts used in the network. Deleted line 12:
%center% Changed lines 24-25 from:
VoIP phones allow telephone calls to be made over an IP network such as the Internet instead of an ordinary PSTN system.%center% to:
VoIP phones allow telephone calls to be made over an IP network such as the Internet instead of an ordinary PSTN system. Changed lines 29-30 from:
%center%Below you can see a possible design of a FreeSentral network that has two office branches. to:
Below you can see a possible design of a FreeSentral network that has two office branches. Changed lines 41-43 from:
I avoided confusion by choosing 7 and 8 for prefixes. An unwanted match will occur if one of the branches has the [[Outbound#system_callerid|System prefix]] 2 and a group that has the [[Extensions#general|extensions]] 20. You will call to 220 wanting to call the group 20 but your call will be forwarded to the [[Extensions#general|extensions]] 220 within that branch.%center% to:
I avoided confusion by choosing 7 and 8 for prefixes. An unwanted match will occur if one of the branches has the [[Outbound#system_callerid|System prefix]] 2 and a group that has the [[Extensions#general|extensions]] 20. You will call to 220 wanting to call the group 20 but your call will be forwarded to the [[Extensions#general|extensions]] 220 within that branch. Changed lines 47-48 from:
%center%Before connecting office branches to headquarters, design your network. Take into consideration how many office branches will connect to the headquarters. Think on the number of employees for every office branch. The number of [[Extensions#general|extensions]] depends on how many people work in every department. If the office branch you want to add is rather small, you would probably want to assign a small [[Extensions#add_range|extension range]]. Also remember to leave some room for possible changes in the network's design. to:
Before connecting office branches to headquarters, design your network. Take into consideration how many office branches will connect to the headquarters. Think on the number of employees for every office branch. The number of [[Extensions#general|extensions]] depends on how many people work in every department. If the office branch you want to add is rather small, you would probably want to assign a small [[Extensions#add_range|extension range]]. Also remember to leave some room for possible changes in the network's design. Changed line 58 from:
You would probably want to read [[HowToSetUpBranchesInHeadquarter|How to set up office branches in headquarters]] if you want your network to work.%center% to:
You would probably want to read [[HowToSetUpBranchesInHeadquarter|How to set up office branches in headquarters]] if you want your network to work. March 18, 2010, at 05:01 PM
by -
Changed lines 8-9 from:
Designing the network is the first important step to a functional FreeSentral network. To understand this step, you must know the concepts used in the network. to:
%center%Designing the network is the first important step to a functional FreeSentral network. To understand this step, you must know the concepts used in the network.%center% Added line 13:
%center% Changed lines 25-26 from:
VoIP phones allow telephone calls to be made over an IP network such as the Internet instead of an ordinary PSTN system. to:
VoIP phones allow telephone calls to be made over an IP network such as the Internet instead of an ordinary PSTN system.%center% Changed lines 30-31 from:
Below you can see a possible design of a FreeSentral network that has two office branches. to:
%center%Below you can see a possible design of a FreeSentral network that has two office branches. Changed lines 42-44 from:
I avoided confusion by choosing 7 and 8 for prefixes. An unwanted match will occur if one of the branches has the [[Outbound#system_callerid|System prefix]] 2 and a group that has the [[Extensions#general|extensions]] 20. You will call to 220 wanting to call the group 20 but your call will be forwarded to the [[Extensions#general|extensions]] 220 within that branch. to:
I avoided confusion by choosing 7 and 8 for prefixes. An unwanted match will occur if one of the branches has the [[Outbound#system_callerid|System prefix]] 2 and a group that has the [[Extensions#general|extensions]] 20. You will call to 220 wanting to call the group 20 but your call will be forwarded to the [[Extensions#general|extensions]] 220 within that branch.%center% Changed lines 48-49 from:
Before connecting office branches to headquarters, design your network. Take into consideration how many office branches will connect to the headquarters. Think on the number of employees for every office branch. The number of [[Extensions#general|extensions]] depends on how many people work in every department. If the office branch you want to add is rather small, you would probably want to assign a small [[Extensions#add_range|extension range]]. Also remember to leave some room for possible changes in the network's design. to:
%center%Before connecting office branches to headquarters, design your network. Take into consideration how many office branches will connect to the headquarters. Think on the number of employees for every office branch. The number of [[Extensions#general|extensions]] depends on how many people work in every department. If the office branch you want to add is rather small, you would probably want to assign a small [[Extensions#add_range|extension range]]. Also remember to leave some room for possible changes in the network's design. Changed line 59 from:
You would probably want to read [[HowToSetUpBranchesInHeadquarter|How to set up office branches in headquarters]] if you want your network to work. to:
You would probably want to read [[HowToSetUpBranchesInHeadquarter|How to set up office branches in headquarters]] if you want your network to work.%center% March 18, 2010, at 01:15 PM
by -
Changed line 55 from:
The connection with the provider is handled at headquarters. Here you will set the [Outbound#gateways|gateway]] and the [Outbound#dial_plan|dial plan]] for the external connection. to:
The connection with the provider is handled at headquarters. Here you will set the [[Outbound#gateways|gateway]] and the [[Outbound#dial_plan|dial plan]] for the external connection. March 04, 2010, at 12:19 PM
by -
Changed line 2 from:
(:title How to build a FS Network?:) to:
(:title How to build a FreeSentral Network?:) March 04, 2010, at 12:02 PM
by -
Changed line 58 from:
to:
You would probably want to read [[HowToSetUpBranchesInHeadquarter|How to set up office branches in headquarters]] if you want your network to work. March 04, 2010, at 11:43 AM
by -
Changed lines 37-43 from:
For a branch to be in working status, it must have the phones connected to it.The VoIP phones must be recognized by the application, so it is necessary to think on how many [[Extensions#extensions|extensions]] to add for every branch(you can see the extensions I choose for branches: 200-299). You may want to avoid extensions starting with 0, 1 or 9 because they might match short or emergency numbers. An important role, for my network phones, is played by the prefix. In this case the prefix is considered a digit that identifies a branch(the first digit is the prefix: 7 for branch1 and 8 for branch2). The caller will dial the prefix and an extension, when calling to a phone that belongs to another branch. The call will be received at headquarters where the prefix will be cut and the call forwarded to that specific branch. I avoided confusion by choosing 7 and 8 for prefixes. An unwanted match will occur if one of the branches has the System prefix 2 and a group that has the extension 20. You will call to 220 wanting to call the group 20 but your call will be forwarded to the extension 220 within that branch. to:
For a branch to be in working status, it must have the phones connected to it.The VoIP phones must be recognized by the application, so it is necessary to think on how many [[Extensions#general|extensions]] to add for every branch(you can see the [[Extensions#general|extensions]] I choose for branches: 200-299). You may want to avoid [[Extensions#general|extensions]] starting with 0, 1 or 9 because they might match short or emergency numbers. An important role, for my network phones, is played by the prefix. In this case the prefix is considered a digit that identifies a branch(the first digit is the prefix: 7 for branch1 and 8 for branch2). The caller will dial the prefix and an [[Extensions#general|extensions]], when calling to a phone that belongs to another branch. The call will be received at headquarters where the prefix will be cut and the call forwarded to that specific branch. I avoided confusion by choosing 7 and 8 for prefixes. An unwanted match will occur if one of the branches has the [[Outbound#system_callerid|System prefix]] 2 and a group that has the [[Extensions#general|extensions]] 20. You will call to 220 wanting to call the group 20 but your call will be forwarded to the [[Extensions#general|extensions]] 220 within that branch. Changed lines 47-55 from:
Before connecting office branches to headquarters, design your network. Take into consideration how many office branches will connect to the headquarters. Think on the number of employees for every office branch. The number of extensions depends on how many people work in every department. If the office branch you want to add is rather small, you would probably want to assign a small extension range. Also remember to leave some room for possible changes in the network's design. Think on how to route calls. Routing calls is only possible if you set prefixes in headquarters for every branch. You may wonder why this setting is so important. Well, the prefix consists of a number of digits that uniquely associates that call to a branch. A call from a branch to a branch is sent to headquarters. The headquarter forwards the call according to the prefix set for that branch. Before forwarding the call, the headquarters will cut that prefix according to the digits set to be cut for that branch's dial plan. [+'''Note'''+]: Take in consideration the System prefix(found in '''Outbound''', at the '''System CallerId''' section) before deciding on the extensions ranges. The System prefix must be different from the extensions' first part. Associating the company's number to an Auto Attendant or a secretary is a common situation(a DID). In FreeSentral you can do all that plus use other features and set DIDs for them. For instance, you can define 555 as a DID for your voice mail. The connection with the provider is handled at headquarters. Here you will set the gateway and the dial plan for the external connection. to:
Before connecting office branches to headquarters, design your network. Take into consideration how many office branches will connect to the headquarters. Think on the number of employees for every office branch. The number of [[Extensions#general|extensions]] depends on how many people work in every department. If the office branch you want to add is rather small, you would probably want to assign a small [[Extensions#add_range|extension range]]. Also remember to leave some room for possible changes in the network's design. Think on how to route calls. Routing calls is only possible if you set prefixes in headquarters for every branch. You may wonder why this setting is so important. Well, the prefix consists of a number of digits that uniquely associates that call to a branch. A call from a branch to a branch is sent to headquarters. The headquarter forwards the call according to the prefix set for that branch. Before forwarding the call, the headquarters will cut that prefix according to the digits set to be cut for that [[Outbound#dial_plan|branch's dial plan]]. [+'''Note'''+]: Take in consideration the System prefix(found in '''[[Outbound|Outbound]]''', at the '''[[Outbound#system_callerid|System CallerID]]''' section) before deciding on the [[Extensions#add_range|extensions ranges]]. The [[Outbound#system_callerid|System prefix]] must be different from the extensions' first part. Associating the company's number to an Auto Attendant or a secretary is a common situation(a DID). In FreeSentral you can do all that plus use other features and set DIDs for them. For instance, you can define 555 as a DID for your [[TelephonyFeatures#voicemail|voice mail]]. The connection with the provider is handled at headquarters. Here you will set the [Outbound#gateways|gateway]] and the [Outbound#dial_plan|dial plan]] for the external connection. March 04, 2010, at 11:29 AM
by -
Changed line 37 from:
For a branch to be in working status, it must have the phones connected to it.The VoIP phones must be recognized by the application, so it is necessary to think on how many [[Extensions#extensions|link extensions]] to add for every branch(you can see the extensions I choose for branches: 200-299). You may want to avoid extensions starting with 0, 1 or 9 because they might match short or emergency numbers. to:
For a branch to be in working status, it must have the phones connected to it.The VoIP phones must be recognized by the application, so it is necessary to think on how many [[Extensions#extensions|extensions]] to add for every branch(you can see the extensions I choose for branches: 200-299). You may want to avoid extensions starting with 0, 1 or 9 because they might match short or emergency numbers. March 04, 2010, at 11:28 AM
by -
Changed line 37 from:
For a branch to be in working status, it must have the phones connected to it.The VoIP phones must be recognized by the application, so it is necessary to think on how many [[Extensions#extensions]] to add for every branch(you can see the extensions I choose for branches: 200-299). You may want to avoid extensions starting with 0, 1 or 9 because they might match short or emergency numbers. to:
For a branch to be in working status, it must have the phones connected to it.The VoIP phones must be recognized by the application, so it is necessary to think on how many [[Extensions#extensions|link extensions]] to add for every branch(you can see the extensions I choose for branches: 200-299). You may want to avoid extensions starting with 0, 1 or 9 because they might match short or emergency numbers. March 04, 2010, at 11:27 AM
by -
Changed line 37 from:
For a branch to be in working status, it must have the phones connected to it.The VoIP phones must be recognized by the application, so it is necessary to think on how many [[#general|extensions]] to add for every branch(you can see the extensions I choose for branches: 200-299). You may want to avoid extensions starting with 0, 1 or 9 because they might match short or emergency numbers. to:
For a branch to be in working status, it must have the phones connected to it.The VoIP phones must be recognized by the application, so it is necessary to think on how many [[Extensions#extensions]] to add for every branch(you can see the extensions I choose for branches: 200-299). You may want to avoid extensions starting with 0, 1 or 9 because they might match short or emergency numbers. March 04, 2010, at 11:23 AM
by -
Changed line 37 from:
For a branch to be in working status, it must have the phones connected to it.The VoIP phones must be recognized by the application, so it is necessary to think on how many extensions to add for every branch(you can see the extensions I choose for branches: 200-299). You may want to avoid extensions starting with 0, 1 or 9 because they might match short or emergency numbers. to:
For a branch to be in working status, it must have the phones connected to it.The VoIP phones must be recognized by the application, so it is necessary to think on how many [[#general|extensions]] to add for every branch(you can see the extensions I choose for branches: 200-299). You may want to avoid extensions starting with 0, 1 or 9 because they might match short or emergency numbers. March 04, 2010, at 10:40 AM
by -
Changed lines 26-27 from:
!![[#example|Example of a FreeSentral network]] to:
[[#example]] !!Example of a FreeSentral network Changed lines 44-45 from:
!![[#design|Designing the network]] to:
[[#design]] !!Designing the network March 04, 2010, at 10:39 AM
by -
Changed lines 10-11 from:
!![[#network_concepts|Network concepts for a FreeSentral network]] to:
[[#network_concepts]] !!Network concepts for a FreeSentral network March 04, 2010, at 10:35 AM
by -
Changed lines 10-12 from:
[[#network_concepts]] !!Network concepts for a FreeSentral network to:
!![[#network_concepts|Network concepts for a FreeSentral network]] Changed lines 25-27 from:
[[#example]] !!Example of a FreeSentral network to:
!![[#example|Example of a FreeSentral network]] Changed lines 42-43 from:
[[#design]] !!Designing the network to:
!![[#design|Designing the network]] March 03, 2010, at 06:24 PM
by -
Changed line 2 from:
(:title How to build a FS Newtork?:) to:
(:title How to build a FS Network?:) March 03, 2010, at 05:57 PM
by -
Added lines 3-5:
This tutorial will try to guide you through the process of comprehending, planning and building a FreeSentral network. Deleted lines 6-7:
This tutorial will try to guide you through the process of comprehending, planning and building a FreeSentral network. March 03, 2010, at 05:57 PM
by -
Deleted lines 5-8:
*[[#network_concepts|Network concepts for a FreeSentral network]] *[[#example|Example of a FreeSentral network]] *[[#design|Designing the network]] March 03, 2010, at 05:53 PM
by -
Changed lines 7-9 from:
*[[#network_concepts|Network concepts for a FreeSentral network]] *[[#example|Example of a FreeSentral network]] *[[#design|Designing the network]] to:
*[[#network_concepts|Network concepts for a FreeSentral network]] *[[#example|Example of a FreeSentral network]] *[[#design|Designing the network]] March 03, 2010, at 05:51 PM
by -
Changed lines 7-9 from:
* [[#network_concepts|Network concepts for a FreeSentral network]] * [[#example|Example of a FreeSentral network]] * [[#design|Designing the network]] to:
*[[#network_concepts|Network concepts for a FreeSentral network]] *[[#example|Example of a FreeSentral network]] *[[#design|Designing the network]] March 03, 2010, at 04:36 PM
by -
Changed line 3 from:
(:tocportion link=Documentation.TableOfContents:) to:
(:tocportion TableOfContents:) March 03, 2010, at 04:35 PM
by -
Changed line 3 from:
(:tocportion TableOfContents:) to:
(:tocportion link=Documentation.TableOfContents:) March 03, 2010, at 04:29 PM
by -
Changed line 3 from:
(:tocportion TableOfContents :) to:
(:tocportion TableOfContents:) March 03, 2010, at 04:25 PM
by -
Changed line 3 from:
(:tocportion:TableOfContents :) to:
(:tocportion TableOfContents :) March 03, 2010, at 04:00 PM
by -
Changed line 3 from:
(:tocportion TableOfContents :) to:
(:tocportion:TableOfContents :) March 03, 2010, at 04:00 PM
by -
Changed line 3 from:
(:tocportion 'TableOfContents':) to:
(:tocportion TableOfContents :) March 03, 2010, at 03:59 PM
by -
Changed line 3 from:
(:tocportion $TocPortionDefaultPage = 'TableOfContents':) to:
(:tocportion 'TableOfContents':) March 03, 2010, at 03:58 PM
by -
Changed lines 3-4 from:
to:
(:tocportion $TocPortionDefaultPage = 'TableOfContents':) Changed line 6 from:
(:tocportion TableOfContents:) to:
March 03, 2010, at 03:54 PM
by - March 03, 2010, at 03:48 PM
by -
Changed line 5 from:
(:tocportion Table of Contents:) to:
(:tocportion TableOfContents:) March 03, 2010, at 03:45 PM
by - March 03, 2010, at 03:30 PM
by -
Changed line 5 from:
to:
(:tocportion Table of Contents:) March 02, 2010, at 10:39 AM
by -
Changed line 43 from:
I avoided confusion by choosing 7 and 8 for prefixes. An unwanted match will occur if one of the branch has the System prefix 2 and a group that has the extension 20. You will call to 220 wanting to call the group 20 but your call will be forwarded to the extension 220 within that branch. to:
I avoided confusion by choosing 7 and 8 for prefixes. An unwanted match will occur if one of the branches has the System prefix 2 and a group that has the extension 20. You will call to 220 wanting to call the group 20 but your call will be forwarded to the extension 220 within that branch. March 01, 2010, at 05:36 PM
by -
Changed lines 15-16 from:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/headquarter_branches_small.png to:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/headquarter_branches_small.jpg Changed line 33 from:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/design_network_small.png to:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/design_network_small.jpg March 01, 2010, at 05:05 PM
by -
Changed line 53 from:
[+''Note''+]: Take in consideration the System prefix(found in ''Outbound'', at the ''System CallerId'' section) before deciding on the extensions ranges. The System prefix must be different from the extensions' first part. to:
[+'''Note'''+]: Take in consideration the System prefix(found in '''Outbound''', at the '''System CallerId''' section) before deciding on the extensions ranges. The System prefix must be different from the extensions' first part. March 01, 2010, at 05:04 PM
by -
Changed line 53 from:
Note: Take in consideration the System prefix(found in Outbound, at the System CallerId section) before deciding on the extensions ranges. The System prefix must be different from the extensions' first part. to:
[+''Note''+]: Take in consideration the System prefix(found in ''Outbound'', at the ''System CallerId'' section) before deciding on the extensions ranges. The System prefix must be different from the extensions' first part. March 01, 2010, at 05:02 PM
by -
Changed line 15 from:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/headquarter_branches.png to:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/headquarter_branches_small.png March 01, 2010, at 04:55 PM
by -
Changed line 33 from:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/design_network_small.jpg to:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/design_network_small.png March 01, 2010, at 04:52 PM
by -
Changed line 33 from:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/design_network.png to:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/design_network_small.jpg March 01, 2010, at 04:46 PM
by -
Changed line 2 from:
(:title How to build a FreeSentral Newtork?:) to:
(:title How to build a FS Newtork?:) March 01, 2010, at 04:46 PM
by -
Changed line 2 from:
to:
(:title How to build a FreeSentral Newtork?:) March 01, 2010, at 04:42 PM
by -
Changed line 15 from:
%margin-left=25px width="400" height="500"% http://www.freesentral.com/uploads/Documentation/headquarter_branches.png to:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/headquarter_branches.png March 01, 2010, at 04:42 PM
by -
Changed line 15 from:
%margin-left=25px width="100" height="200"% http://www.freesentral.com/uploads/Documentation/headquarter_branches.png to:
%margin-left=25px width="400" height="500"% http://www.freesentral.com/uploads/Documentation/headquarter_branches.png March 01, 2010, at 04:41 PM
by -
Changed lines 15-16 from:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/headquarter_branches.png to:
%margin-left=25px width="100" height="200"% http://www.freesentral.com/uploads/Documentation/headquarter_branches.png Changed line 33 from:
%margin-left=25px width="25" height="50"% http://www.freesentral.com/uploads/Documentation/design_network.png to:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/design_network.png March 01, 2010, at 04:41 PM
by -
Changed line 33 from:
%margin-left=25px width="25%" height="50%"% http://www.freesentral.com/uploads/Documentation/design_network.png to:
%margin-left=25px width="25" height="50"% http://www.freesentral.com/uploads/Documentation/design_network.png March 01, 2010, at 04:40 PM
by -
Changed lines 33-34 from:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/design_network.png to:
%margin-left=25px width="25%" height="50%"% http://www.freesentral.com/uploads/Documentation/design_network.png Changed line 61 from:
// to:
March 01, 2010, at 04:38 PM
by -
Added lines 15-16:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/headquarter_branches.png Added lines 32-33:
%margin-left=25px% http://www.freesentral.com/uploads/Documentation/design_network.png March 01, 2010, at 04:26 PM
by -
Changed lines 56-58 from:
to:
March 01, 2010, at 04:24 PM
by -
Changed lines 3-4 from:
!!How to build a FreeSentral network? to:
Changed lines 13-14 from:
!Network concepts for a FreeSentral network to:
!!Network concepts for a FreeSentral network Changed lines 27-28 from:
!Example of a FreeSentral network to:
!!Example of a FreeSentral network Changed line 43 from:
!Designing the network to:
!!Designing the network March 01, 2010, at 04:24 PM
by -
Changed lines 14-15 from:
to:
!Network concepts for a FreeSentral network Changed lines 28-29 from:
to:
!Example of a FreeSentral network Added line 44:
!Designing the network March 01, 2010, at 04:22 PM
by -
Changed lines 7-10 from:
* [[Network concepts for a FreeSentral network]] * [[Example of a FreeSentral network]] * [[Designing the network]] to:
* [[#network_concepts|Network concepts for a FreeSentral network]] * [[#example|Example of a FreeSentral network]] * [[#design|Designing the network]] Changed lines 13-15 from:
[[Network concepts for a FreeSentral network:]] to:
[[#network_concepts]] Changed lines 27-28 from:
[[Example of a FreeSentral network:]] to:
[[#example]] Changed line 42 from:
[[Designing the network:]] to:
[[#design]] March 01, 2010, at 04:19 PM
by -
Changed lines 1-2 from:
(:order_number=5:) to:
(:order_number:5:) Changed lines 7-9 from:
# [[Network concepts for a FreeSentral network]] # [[Example of a FreeSentral network]] # [[Designing the network]] to:
* [[Network concepts for a FreeSentral network]] * [[Example of a FreeSentral network]] * [[Designing the network]] March 01, 2010, at 04:17 PM
by -
Added lines 1-55:
|
| © YATE 2009 |
View
Edit
History
Attach
Recent Changes
Print
|